天然气新型气液分离器性能试验研究

为了解决天然气含有饱和水汽和少量烃降低输气效率、堵塞管线和设备等问题,利用旋风子、稳流元件、叶栅式分离元件、折流板式分离元件组合成新型天然气分离器。利用相位多普勒粒子分析仪对新型天然气分离器进出口粒子粒径与液态水含量的进行对比测试,以研究新型分离器的分离效率。结果表明:新型分离器具有良好的气液分离作用;在流量为10～64 m~3/h时,分离器的分离效率成抛物线形式,在33 m~3/h时分离器的分离效率降到最低值95.16%,主要原因是流量在33 m~3/h时,试验气液混合不均匀,导致内部流态紊乱,以至于试验测得分离效率相对偏低;在流量为10 m~3/h时分离器分离效率最高,为99.29%;分离器对该进口条件的气体中雾状液粒有较高的分离作用,且可以明显降低分离器出口气体中液粒的平均粒径;从进口到气相出口压力逐渐降低,总压降为950 Pa;流动区域速度梯度大不利于气液相分离,流动掺混会导致分离效率降低。     

Methodology for optimization of pouring variables using bottom pour for low masses of SS304 (<300 kg) in investment casting process (case study)

Bottom pour ladles with stopper rod systems are commonly used in the metal casting industry. However, stopper rod bottom-pouring systems have not yet been developed for the lower thermal masses of alloys typically used in the investment casting industry. Large thermal masses used with bottom pour systems are typically limited for ladles larger than 700 kg and to certain alloys with higher fluidity and longer solidification time like cast iron, aluminum alloys etc. In this study, bottom pour ladle designs and low thermal mass refractory systems have been developed and evaluated in production investment foundry trials with 300 kg pouring ladle. The ladles system and pouring practices used will be described along with the results from the pouring trials for SS304 that represents typical alloys used in Investment casting industries. Optimization of the variables used in an experimentation using Genetic algorithm is also explained.     

浅谈煤与瓦斯突出矿井"U"型通风系统采煤工作面上隅角瓦斯管理

屯兰煤矿是煤与瓦斯突出矿井,瓦斯涌出量大,上隅角瓦斯治理困难。为解决这一通风难题,该矿采取沿空留巷抽采措施进行作业。实践证明,该技术解决了上隅角瓦斯积聚隐患,保障了矿井高产高效。     

采场动压分布特征及高效瓦斯抽放技术研究

河南地区大部分煤矿所采煤层均属于三软煤层，煤层透气性差，瓦斯治理困难。现阶段河南区域煤与瓦斯突出矿井主要采用穿层钻孔及开采保护层作为区域防突措施，而低瓦斯矿井或临突矿井（低瓦斯矿井与煤与瓦斯突出矿井相邻）存在高瓦斯区时，仅仅用风排瓦斯很难达到治理效果，近些年煤矿发生瓦斯事故多数为低瓦斯矿井，所以低瓦斯矿井和临突矿井存在高瓦斯区域的工作面回采期间瓦斯治理尤为重要。根据采场“竖三带”和“横三区”理论，利用钻孔抽放效果考察法和工作突出预测指标法研究了采场围岩动压分布特征。在此基础上，通过优化动压区抽放钻孔设计，提高了瓦斯抽放效果。瓦斯抽放量提高了1.8倍，有效降低了工作面生产期间的风排瓦斯量，提高了生产效率，保证了矿井安全生产。     

煤层顶板裂隙高位定向长钻孔安全高效抽采技术的研究与应用

放顶煤开采期间，上覆岩层受到矿压的影响，形成冒落带、裂隙带、弯曲下沉带，工作面采空区遗煤和围岩涌出的大量瓦斯飘浮在上方裂隙带区域，造成瓦斯聚集并向外涌出，形成了安全隐患，因此必须将该区域瓦斯抽出来；以往治理采空区瓦斯主要采用顶板裂隙高位钻场、顶板高抽巷等措施，但是这2种方法施工成本较高，且施工周期长，对生产接替影响较大。煤层顶板裂隙高位定向长钻孔安全高效抽采采用大功率钻机+定向钻进技术，在裂隙带施工控制整个回采范围的长钻孔，减少采空区和邻近层瓦斯向工作面空间的流动，真正实现了“以孔代巷”，既节省了成本，又缩短了工期，还提高了采空区瓦斯抽采的连续性、稳定性，减少了采空区瓦斯向外涌出，提升了瓦斯抽采效果，促进了煤矿安全高效发展。     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Comparison of throttle devices to measure two-phase flowrates of wet gas with extremely-low liquid loading

The online measurement of wet gas with extremely-low liquid loading (Lockhart-Martinelli parameter lower than 0.02) remains a challenge. In this study, three types of throttle devices, Venturi, orifice plate and cone, are compared experimentally with air-water two-phase flow in a horizontal pipe of inner diameter of 50 mm. High-precision correlations are established to measure the gas and liquid flowrates via a single throttle device. Results show that the two-phase mass flow coefficient (K) of the three throttle devices all increase linearly with the liquid densiometric Froude number and the K correlations are established respectively to correct the gas mass flowrate deviation. The pressure loss ratio (δ) for Venturi is sensitive and monotonous to the liquid loading, which contributes to the high accuracy of liquid flowrate measurement. By incorporating the K correlations, both the gas and liquid mass flowrates can be predicted precisely. The relative error of the gas mass flowrate predicted by the Venturi is within ±2.0% at 95% confidence level, and that of the liquid mass flowrate is within ±15% at 90% confidence level.     

长管拖车缠绕气瓶纤维层冲击损伤的数字射线检测

采用缠绕气瓶替代钢制无缝气瓶是长管拖车轻量化的重要手段之一,但对于缠绕气瓶缠绕层因冲击造成的内部损伤,目前仍缺少成熟有效的检测手段。采用数字射线检测方法,针对玻璃纤维缠绕层冲击损伤造成的分层和危害较大的纤维断裂进行了试验研究。试验表明,采用数字射线检测能够有效检测最小深度为0.5 mm模拟纤维环向断裂刻槽和0.25 mm的模拟纤维轴向断裂刻槽;此外,还通过试验验证增加补偿块的方式,能极大地改善缠绕层分层部位的一次切向透照成像质量,进而提高检测效率。